EasyManua.ls Logo

Netgate FXS Series - Page 59

Netgate FXS Series
247 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
FXS Gateway Overview
- 42 -
Note:
With Dynamic WAN IP Address, a valid Gatekeeper for VoIP
Gateway to get register on is a must. In other word, it is not workable in
Peer-to-Peer mode while dynamic WAN IP Address.
Step 6. IP Sharing device must have a function to do IP/Port mapping. Some
is named as DMZ, some is named as virtual server whatever. The VoIP
messages from WAN have to completely pass forward to the LAN. It is
said if the VoIP Gateway is assigned a virtual fixed IP Address such as
192.168.1.5, IP Sharing device must forward the VoIP message to
192.168.1.5.
Step 7. Configuration the VoIP Gateway IP address for IP Sharing Mode.
Click [Network Interface] on the navigation panel. In the Network Interface
screen, enter the IP address, Subnet mask and the default gateway in the
network table. Please follow up your IP Sharing device
Step 8. Enable the IP sharing function and put the static IP address in the IP
Sharing server address (e.g. 210.59.163.198) and click the OK button.

Table of Contents

Related product manuals