Command with FXS Gateway
- 141 -
Note:
The port number allocation is for reference only. RTP/RTCP port may allocate on
unexpected port. It is better to define the port in wider range than limited range
24.4.6 PPPoE Mode
Step 1. Set PPPoE mode, using [ifaddr]
usr/config$ ifaddr –mode 2 (PPPoE mode)
Step 2. Input the user id & password provided by your ISP, using [ifaddr]
usr/config$ ifaddr –id 123@hinet.net (PPPoE login account)
usr/config$ ifaddr –pwd 123 (PPPoE login Passowd)
Step 3. Reboot the device once after disconnection, using [ifaddr]
usr/config$ ifaddr –reboot 1 (Enable)
To Next Page
Loading...
