EasyManua.ls Logo

Netgate FXS Series - Page 164

Netgate FXS Series
247 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Command with FXS Gateway
- 147 -
usr/config$ commit
usr/config$ reboot
Step 5. When Gateway connection success.
Step 6. Setup PC use LAN IP connection Network
Select [Specify an IP Address] and enter [192.168.123.111] in the [IP Address]
location (where xxx is a number between 2 and 254 used by the VoIP Gateway to
identify each computer), and the default [Subnet Mask 255.255.255.0]. Note than
no two computers on the same LAN can have the same IP address. Gateway
default gateway value 192.168.123.123 in the [new gateway] field. Then save
your change.
Note:
One Group only use only LAN IP address, if have two gateway on this group, you
must change second gateway LAN IP Address different first gateway.
Gateway First:
usr/config$ ifaddr -lanip 192.168.124.124
Gateway Second:
usr/config$ ifaddr -lanip 192.168.124.125
Important Note:
This command function only 1FXS (FXS-01) VoIP Gateway used. So, other mode

Table of Contents

Related product manuals