Command with FXS Gateway
- 150 -
keypad, user is possible to click the Hook quickly by sending FLASH message. The
default FLASH value for Gateway is between 100ms to 300 ms. It is said the value of
Gateway is subject to the telephone set.
¾ Call Hold – press [FLASH]
By pressing the FLASH after making a call, both site shall hear the 2nd dial tone
generated by Gateway. To retrieve the call back, just press the FLASH again.
¾ Call Transfer – press [FLASH], then [transferring number]
For example, A call B, B transfer to C
A make call to B, B press FLASH. A and B hear 2nd dial tone. B presses the C’s
number. C ringing and A hear the RingBack tone. B Hang up its call. A and C Make
call.
¾ Call Forward:
¾ Activate - *147#
¾ Deactivate - *258#
¾ Busy Forward – [Forward No.] *#
¾ No response/ Answer – [Forward No.]*1#
¾ Unconditional – [Forward No.]*2#
It is important to send an activate/deactivate call forward message before setting
To Next Page
Loading...
