Command with FXS Gateway
- 172 -
mode). When SNTP function is activated, users have to specify a SNTP
server as network time source. An example is demonstrated below:
usr/config$ ifaddr -sntp 1 10.1.1.1
Note:
While 10.1.1.1 stands for SNTP server’s IP address.
-timezone: set local time zone according to GMT
-ipsharing: To specify a global fixed IP address, user can add this IP address in the
command.
usr/config$ ifaddr -ipsharing 1 210.11.22.33
Note:
If the IP address is not a fixed one, the dedicated IP address is not necessary
in the command. However, dynamic IP Address is not working in Peer-to-Peer
mode.
-ipchange: If the unit is behind the IP sharing device and the IP address for the WAN
port of that IP sharing is using the dynamic IP address. This function has to
be enabled.
usr/config$ ifaddr -ipchange 1
-id: This id is for the user name of the PPPoE usage.
-pwd: This password is for the user name of the PPPoE usage.
To Next Page
Loading...
