Command with FXS Gateway
- 179 -
as 12345678 [sysconf –usrdefprefix 12345678]. While user would like to dial other
numbers, he can dial a defined digit – [*] to disable the function
[sysconf –prefixdisab *], then dial to the number he wants to dial.
-codec: Set who is the one to determine voice codec during negotiation. 0 is caller will
determine the codec, and 1 is mater will determine the codec. (During
negotiation 2 endpoints will compare gateway type level to determine who is
master.)
-localrbt: Enable or Disable locally generate ring back tone. Disable means gateway
will receive ring back tone from remote callee, Enable means gateway will
generate ring back tone locally.
-gwprefix: Drop or keep gateway prefix . Keep Means when gateway has incoming call
from IP side, it will not drop prefix before searching for call number. Drop
Means when gateway has incoming call from IP side, it will drop prefix before
searching for called number.
-eod: It will transfer the DTMF in [#] if users disable the end of dial function. Users
have to press the keypad in [#] if the end of dial function is enable.
Note:
User can also define IP address here in P2P mode, once user press “#”,
Gateway will call out this IP address.
To Next Page
Loading...
