Command with FXS Gateway
- 208 -
-tunnel: Enable or disable H.245 tunneling function. The function is send H.245 (Call
Control messages) via H.225’s (Call Signal messages) link. The function is
effective only when both side support h245 tunnel.
-h245fs: Enable or disable Gateway H.245 FastStart. The function is send h.245
messages after FastStart.
-earlyh245: Enable or disable early H.245 function. The function is effective only when
both sides support early H.245.
-h450: Enable or disable H.450 related features, which include transfer, hold and
forward.
Note:
It is not recommended to change the value in this command, only if users do know
well the application. This might cause incompatibility with other devices.
For example:
usr/config$ support -print
Special Voice function support manipulation
T.38(FAX) support : Disabled
To Next Page
Loading...
