Command with FXS Gateway
- 220 -
[-passwd Password][-checkip used][-checkipsrv Address][-delay time]
[-force IP]
ddns -print Display Dynamic DNS information and configuration.
-enable Use the dynamic DNS service(0=Disable, 1=Enabled).
-server Specify DDNS server address.
-hostname Registered domain name.
-id Registered account ID.
-passwd Registered account password.
-checkip Check the host current IP address(0=Disable, 1=Enabled).
-checkipsrv1 Specify IP address check server.
-checkipsrv2 Specify secondary IP address check server.
-delay Setting the service delay time (1~59 minutes or 1~24
horus).
-force Force execute the dynamic DNS service.
Example:
ddns -print
ddns -enable 1
ddns -server member.dyndns.org -hostname ipphone.dyndns.org
To Next Page
Loading...
