FXS Gateway Overview
- 21 -
the [Network] icon. Your Network window should appear as follows.
Step 2. Select the [Configuration] tab.
Import:
For Windows 2000 & Windows XP Setting, you will find that they differs with
Windows 98/ME/NT slightly. See the Following for reference.
Click the “Local Area Connection” icon on the lower right hand side of your
desktop screen.
In the [Local Area Connection Status] windows, click the [Properties] button the
your Network windows will appear.
There is only one tab, [General], in the Network window.
Step 3. Click whether the TCP/IP Protocol has already been installed onto your
computer’s Ethernet card. Note that TCP/IP Protocol an be installed for a
computer’s Dial-Up Adapter as well as for the Ethernet cad.
- If yes, go to set 7.
- If no, click the [Add] button
Step 4. Double-click [Protocol] in the Select Network Component Type or highlight
[Protocol] then click [Add].
Step 5. Highlight [Microsoft] under the list of manufactures
Step 6. After a new second, you will be returned to the Network window. The TCP/IP
To Next Page
Loading...
