FXS Gateway Overview
- 67 -
LABEL DESCRIPTION
primary connection success, will show you the DNS ip address
from the ISP.
Reboot After
Remote Host
Disconnection
Select enable or disable this function will make the
gateway restart automatically if the PPPoE connection is
disconnected or the IP address was taken back by the ISP.
Send PPPoE Echo
Request
When the IP mode is in PPPoE mode, select enable or
disable this function will make the gateway send echo
request packet or not.
EMS IP
Set EMS server IP address.
EMS User Name
Set EMS authentication user name.
EMS Password
Set EMS authentication password
EMS Time
Set EMS refresh time.
OK [button] Click [OK] button to save your changes back to the VoIP
Gateway volatile memory.
Note:
EMS is a centrally managed solution for NetGate Voip device. When you
upgrade the firmware of NetGate VoIP device, EMS can provide you an easy
To Next Page
Loading...
