Manage Port Forwarding and Port Triggering
176
AC1600 WiFi Cable Modem Router
For more information about the settings, see Add a Port Triggering Rule on page 173.
10. Click the Apply button.
Your settings are saved. The changed rule displays in the Port Triggering Portmap Table
on the Port Forwarding / Port
Triggering page.
Disable or Remove a Port Triggering Rule
You can disable or remove a port triggering rule that you no longer need.
To disable or remove a port triggering rule:
1. Launch an Internet browser from a computer or WiFi device that is connected to the
network.
2. T
ype http://www.routerlogin.net.
A login window opens.
3. T
ype admin for the user name and type your password.
If you did not yet personalize your password, type password for the password.
4. Click the OK button.
The BASIC Home page displays.
5. Select ADV
ANCED > Advanced Setup > Port Forwarding / Port Triggering.
The Port Forwarding / Port Triggering page displays.
6. Select the Port T
riggering radio button.
The following figure shows two port triggering rules.
To Next Page
Loading...
Need help?
General
