Manage the WAN and LAN Network Settings
84
AC1600 WiFi Cable Modem Router
5. Select ADVANCED > Setup > WAN Setup.
The WAN Setup page displays.
6. Select the Disable SIP ALG check box.
The SIP ALG is enabled by default.
7. Click the Apply button.
Your settings are saved.
Manage the Modem Router’s LAN IP Address Settings
The modem router is preconfigured to use private IP addresses on the LAN side and to act as
a DHCP server. The modem router’s default LAN IP configuration is as follows:
• LAN IP address. 192.168.0.1 (This is the same as www.routerlogin.net and
www.routerlogin.com.)
• Subnet mask. 255.255.255.0
These addresses are part of the designated private address range for use in private networks
and are suitable for most applications. The IP address and subnet mask identify which
addresses are local to a specific device and which must be reached through a gateway or
modem router. You might want to change these settings if you need a specific IP subnet that
one or more devices on the network use, or if competing subnets use the same IP scheme.
To change the LAN IP address settings:
1. Launch an Internet browser from a computer or WiFi device that is connected to the
network.
2. Type http://www.routerlogin.net.
A login window opens.
3. Type admin for the user name and type your password.
If you did not yet personalize your password, type password for the password.
4. Click the OK button.
The BASIC Home page displays.
5. Select ADVANCED > Setup > LAN Setup.
To Next Page
Loading...
Need help?
General
