Manage the WAN and LAN Network Settings
87
AC1600 WiFi Cable Modem Router
Change a Reserved IP Address
You can change the settings for a reserved IP address.
To change a reserved IP address:
1. Launch an Internet browser from a computer or WiFi device that is connected to the
network.
2. Type http://www.routerlogin.net.
A login window opens.
3. Type admin for the user name and type your password.
If you did not yet personalize your password, type password for the password.
4. Click the OK button.
The BASIC Home page displays.
5. Select ADVANCED > Setup > LAN Setup.
The LAN Setup page displays.
6. In the Address Reservation Table, select the radio button next to the reserved address that
you want to change.
7. Click the Edit button.
The Address Reservation page displays.
8. Change the settings.
9. Click the Apply button.
The changes are entered into the Address Reservation Table on the LAN Setup page.
10. On the LAN Setup page, click the Apply button.
Your settings are saved.
Remove an IP Address Reservation
You can remove an IP address reservation that you no longer need.
To remove an IP address reservation:
1. Launch an Internet browser from a computer or WiFi device that is connected to the
network.
2. Type http://www.routerlogin.net.
A login window opens.
3. Type admin for the user name and type your password.
If you did not yet personalize your password, type password for the password.
4. Click the OK button.
To Next Page
Loading...
Need help?
General
