NETGEAR C6250 User Manual

Factory Default Settings and Specifications
195
AC1600 WiFi Cable Modem Router
Factory Default Settings
You can return the modem router to its factory default settings (see Return the Modem
Router to Its Factory Default Settings on page 113). The following table shows the factory
default settings.
Table 6. Factory default settings
Feature Default Settings
Router login User login URL http://www.routerlogin.net, http://www.routerlogin.com,
or http://192.168.0.1
User name (case-sensitive) admin
Login password (case-sensitive) password
Local area network
(LAN)
LAN IP address 192.168.0.1
Subnet mask 255.255.255.0
DHCP server Enabled
DHCP range 192.168.0.10 to 192.168.0.254
DHCP start IP address 192.168.0.11
DHCP end IP address 192.168.0.254
Reserved IP address for
ReadySHARE
192.168.0.10
UPnP Enabled
Wide area network
(WAN) and security
Port scan and DoS protection Disabled
Default DMZ server Disabled
Respond to ping on Internet port Disabled
MTU size Uses the maximum MTU value for best throughput
SIP ALG Enabled
Remote management over WAN Disabled
Inbound communication from the
Internet
Disabled, except for traffic on port 80 (the HTTP port)
in response to requests from the LAN
Outbound communication to the
Internet
Enabled
Network address translation Enabled (nonconfigurable)
Stateful packet inspection Enabled (nonconfigurable)
Sites blocked None
Services blocked None

NETGEAR C6250 Specifications

General

Device Type	Cable Modem Router
WiFi Technology	802.11ac
WiFi Performance	AC1600
WiFi Range	Medium to large homes
Max Download Speed	680 Mbps
USB Ports	1 x USB 2.0
Cable Modem Standard	DOCSIS 3.0
Channel Bonding	16x4
IPv6 Support	Yes
Security	WPA/WPA2
Compatibility	Xfinity from Comcast, Spectrum, Cox