Manage the Basic WiFi Network Settings
52
AC1600 WiFi Cable Modem Router
Configure WEP Legacy WiFi Security for the Guest WiFi
Network
Wired Equivalent Privacy (WEP) security is a legacy authentication and data encryption
mode that is superseded by WPA-PSK and WPA2-PSK. WEP supports speeds of up to
54 Mbps (the modem router is capable of speeds of up to 300 Mbps).
IMPORTANT:
The WiFi mode of the guest WiFi network depends on the WiFi
mode of the main WiFi network. For you to be able to configure
WEP in the guest WiFi network, first configure the mode for the
main WiFi network as Up to 54 Mbps. For information about
configuring the WiFi mode, see Manage the Basic WiFi Settings and
WiFi Security of the Main Network on page 36.
To configure WEP security for the guest WiFi network:
1. Launch an Internet browser from a computer or WiFi device that is connected to the
network.
2. T
ype http://www.routerlogin.net.
A login window opens.
3. T
ype admin for the user name and type your password.
If you did not yet personalize your password, type password for the password.
4. Click the OK button.
The BASIC Home page displays.
5. Select BASIC > Guest Network.
The Guest Network Settings page displays.
6. In the Security Options section, select the WEP radio button.
These options display only if you
select the Up to 54 Mbps mode
for the main WiFi network.
To Next Page
Loading...
Need help?
General
