Secure Your Network
61
AC1600 WiFi Cable Modem Router
Add Disconnected Devices to or Remove Them from the Allowed List
If you set up an access list that blocks all new devices from accessing your network, you can
specify which devices that are currently not connected to the modem router but that were
connected in the past are allowed to access your network when they attempt to reconnect.
Note: You cannot remove a device from the allowed list while the device is
currently connected to the modem router. To remove such a device,
you must wait until the device disconnects from the modem router.
To add a disconnected device to the allowed list or remove it from the allowed list:
1. Launch an Internet browser from a computer or WiFi device that is connected to the
network.
2. Type http://www.routerlogin.net.
A login window opens.
3. Type admin for the user name and type your password.
If you did not yet personalize your password, type password for the password.
4. Click the OK button.
The BASIC Home page displays.
5. Select ADVANCED > Security > Access Control.
The Access Control page displays.
6. Click the View list of allowed devices not currently connected to the network link.
To Next Page
Loading...
Need help?
General
