Virtual Private Networking
118
N600 Wireless Dual Band Gigabit VDSL2 Modem Router DGND3800B
VPN Tunnel Control
Activate a VPN Tunnel
There are three ways to activate a VPN tunnel:
• Use the VPN Status screen.
• Ping the remote endpoint.
• Start using the VPN tunnel.
See Use Auto Policy to Configure VPN Tunnels on page 124 for information about how to
enable the IKE keep-alive capability on an existing VPN tunnel.
To use the VPN Status screen to activate a VPN tunnel:
1. Select Advanced > VPN Status. The VPN Status/Log screen displays:
2. Click VPN Status to display the Current VPN Tunnels (SAs) screen:
3. Click Connect for the VPN tunnel that you want to activate.
To Next Page
Loading...
Need help?
General
