Wireless Settings
35
N600 Wireless Dual Band Gigabit VDSL2 Modem Router DGND3800B
Wireless Settings
The Wireless Settings screen lets you view or configure the wireless network configuration.
Once you have established basic wireless connectivity, you can enable security settings
appropriate to your needs.
Before you begin, check the following:
• Every wireless computer has to be able to obtain an IP address by DHCP from the router
as described in Use Standard TCP/IP Properties for DHCP on page 17.
• Each computer or wireless adapter in your network supports the wireless mode
(bandwidth/data rate) and the security option you want to use.
To configure the wireless settings:
If you use a wireless connection to log in and change the wireless security settings, you are
disconnected when you click Apply. To avoid this problem, use a computer with a wired
connection to access the modem router to configure the wireless settings.
1. Select Setup > Wireless Settings to display the following screen.
To Next Page
Loading...
Need help?
General
