Virtual Private Networking
123
N600 Wireless Dual Band Gigabit VDSL2 Modem Router DGND3800B
2. Click VPN Status. The Current VPN Tunnels (SAs) screen displays:
3. Click Drop for the VPN tunnel that you want to deactivate.
To delete a VPN tunnel:
1. Select Advanced > VPN Policies to display the VPN Policies screen.
2. In the Policy Table, select the radio button for the VPN tunnel to be deleted, and then
click Delete.
Set Up VPN Tunnels in Special Circumstances
When the VPN Wizard and its VPNC defaults (see Table 4 on page 102) are not appropriate
for your circumstances, use one of these alternatives:
• Auto Policy. For a typical automated Internet Key Exchange (IKE) setup, see Use Auto
Policy to Configure VPN Tunnels on page 124. Auto Policy uses the IKE protocol to
define the authentication scheme and automatically generate the encryption keys.
• Manual Policy. For a manual keying setup in which you have to specify each phase of
the connection, see Use Manual Policy to Configure VPN Tunnels on page 131. Manual
Policy does not use IKE. Rather, you manually enter all the authentication and key
parameters. You have more control over the process; however, the process is more
complex, and there are more opportunities for errors or configuration mismatches
To Next Page
Loading...
Need help?
General
