Content Filtering
50
N600 Wireless Dual Band Gigabit VDSL2 Modem Router DGND3800B
4. The modem router has a list of NETGEAR NTP servers. If you would prefer to use a
particular NTP server as the primary server, select the Use this NTP Server check box, and
enter its IP address.
5. Click Apply to save your settings.
Schedule Firewall Services
If you enabled services blocking in the Block Services screen or port forwarding in the Port
Forwarding/Port Triggering screen, you can set up a schedule for when blocking occurs or
when access is not restricted.
To schedule firewall services:
1. Select Content Filtering > Schedule to display the following screen:
2. To block Internet services based on a schedule, select Every Day, or select one or more
days. If you want to limit access completely for the selected days, select All Day. Otherwise,
to limit access during certain times for the selected days, enter times in the Start Time and
End Time fields.
Note: Enter the values in 24-hour time format. For example, 10:30 a.m.
would be 10 hours and 30 minutes, and 10:30 p.m. would be 22
hours and 30 minutes. If you set the start time after the end time, the
schedule is effective through midnight the next day.
3. Click Apply to save your settings.
To Next Page
Loading...
Need help?
General
