Virtual Private Networking
131
N600 Wireless Dual Band Gigabit VDSL2 Modem Router DGND3800B
a. Select Advanced > VPN Status to display the VPN Status/Log screen. Then click
VPN Status to display the Current VPN Tunnels (SAs) screen:
b. Click Connect for the VPN tunnel that you want to activate. Review the VPN
Status/Log screen (Figure a on page 117) to verify that the tunnel is connected.
Use Manual Policy to Configure VPN Tunnels
As an alternative to IKE, you can use manual keying, in which you have to specify each
phase of the connection. A manual VPN policy requires all settings for the VPN tunnel to be
manually input at each end (both VPN endpoints).
To Next Page
Loading...
Need help?
General
