Router Internet Setup
22
N600 Wireless Dual Band Gigabit VDSL2 Modem Router DGND3800B
You are prompted to change the administrator password:
5. Enter the current password, and then enter the new password and click Next.
With automatic Internet detection, the Setup Wizard searches your Internet connection
for servers and protocols to determine your ISP configuration.
Note: The Setup Wizard cannot detect a Point-to-Point Tunneling Protocol
(PPTP) connection. If your ISP uses PPTP, you have to set your
Internet connection through the screen described in Manual Setup
(Basic Settings) on page 22.
Manual Setup (Basic Settings)
The Basic Settings screen displays when you select No. I want to configure the Router myself
in the Setup Wizard and is also available from the router menus. It is where you view or
change ISP information. The fields that display vary depending on whether or not your
Internet connection requires a login.
Note: Check that the country and language are set as described Setup
Wizard on page 21 before proceeding with the manual setup.
To set up the basic settings manually:
1. Select Set Up > Basic Settings and select Yes or No depending on whether or not
your ISP requires a login.
• Yes. Select the encapsulation method and enter the login name. If you want to
change the login time-out, enter a new value in minutes.
• No. Enter the account and domain names, as needed.
To Next Page
Loading...
Need help?
General
