USB Storage
71
N600 Wireless Dual Band Gigabit VDSL2 Modem Router DGND3800B
Available Network Folders
• Folder Name. Full path of the Network folder.
• Volume Name. Volume name from the storage device (either USB drive or HDD).
• Total Free Space. The space currently available on the storage device.
• Share Name. You can click the name shown or you can type it into the address field of
your Web browser. If Not Shared is shown, then the default share has been deleted and
no other share for the root folder exists. Click the link to change this setting.
• Read/Write Access. Shows the permissions and access controls on the Network folder.
Selecting All no password allows all users to access the Network folder. You are
prompted to enter the same password that you use to log in to the modem router.
Create a Network Folder
You can create a network folder on the USB device that is attached to the USB port on the
rear panel of the modem router.
To create a network folder:
1. From the USB Storage (Advanced Settings) screen, click the Create Network Folder
button to open the Create a Network Folder screen:
2. Type a name in the Folder field.
• You can specify the folder’s share name, read access, and write access from All-no
password to admin.
• The password for admin is the same one that is used to log in to the modem router .
By default it is password.
3. Click Apply so that your changes take effect.
To Next Page
Loading...
Need help?
General
