Advanced Settings
85
N600 Wireless Dual Band Gigabit VDSL2 Modem Router DGND3800B
Enable SSID Broadcast. If this feature is enabled, the modem router broadcasts its name
(SSID) to all wireless stations. Stations that have no SSID (or a null value) can then adopt the
correct SSID for connections to this access point.
Fragmentation Threshold, CTS/RTS Threshold, and Preamble Mode. Do not change
these settings. The Fragmentation Threshold, CTS/RTS Threshold, and Preamble Mode
settings are reserved for wireless testing and advanced configuration only.
WPS Settings
Router’s PIN. The PIN number that you use on a registrar (for example, from the Network
Explorer on a Vista Windows PC) to configure the modem router’s wireless settings through
WPS. You can also find the PIN on the modem router’s product label.
Disable Router’s PIN. The PIN function might temporarily be disabled when the modem
router detects suspicious attempts to break into the modem router’s wireless settings by
using the modem router’s PIN through WPS. You can manually enable the PIN function by
clearing the Disable Router’s PIN check box.
Keep Existing Wireless Settings. By default, the Keep Existing Wireless Settings check
box is selected. This shows whether the router is in the WPS configured state.
If the Keep Existing Wireless Settings check box is not selected, adding a new wireless client
changes the router’s wireless settings to an automatically generated random SSID and
security key. NETGEAR does not recommend this. In addition, if this option is selected, some
external registrars (e.g., Network Explorer on Vista Windows) might not see the router.
Configuring the basic wireless settings from the router’s management interface selects this
option automatically.
Wireless Card Access List. By default, any wireless computer that is configured with the
correct SSID is allowed access to your wireless network. For increased security, you can
restrict access to the wireless network to allow only specific computers based on their MAC
addresses. On the Wireless Settings screen, select Setup Access List to display the
Wireless Access List screen.
To Next Page
Loading...
Need help?
General
