Hardware Setup
15
N600 Wireless Dual Band Gigabit VDSL2 Modem Router DGND3800B
Verify the Cabling
Verify that your router is cabled correctly by checking the modem router LEDs. Turn on the
modem router by pressing the Power On/Off button on the back.
• The Power LED is green when the modem router is turned on.
•
The LAN port is green when a computer is cabled to the router by an Ethernet cable.
•
The Wireless LEDs are lit when the modem router is turned on.
•
The DSL LED is green when you have an ADSL connection.
•
The Internet LED is red when there is no Internet connection.
Turn on your computer. If software usually logs you in to your Internet connection, do not run
that software. Cancel it if it starts automatically.
To Next Page
Loading...
Need help?
General
