Advanced Settings
93
N600 Wireless Dual Band Gigabit VDSL2 Modem Router DGND3800B
• The access points are on the same LAN. That is, the LAN IP addresses for the
access points are in the same network.
• If you are using DHCP, access point devices are set to Obtain an IP address
automatically (DHCP Client) in the Basic Settings screen.
• Access point devices use the same SSID, channel, authentication mode, and
encryption.
Verify connectivity across the LANs. A computer on any LAN segment should be able to
connect to the Internet or share files and printers with any other PCs or servers connected to
any of the three WLAN segments.
Remote Management
The Remote Management screen lets you allow a user or users on the Internet to configure,
upgrade, and check the status of your modem router.
To configure remote management:
1. Select Advanced > Remote Management to display this screen:
2. Select the Turn Remote Management On check box.
3. Specify the external addresses that can access remote management. For security, restrict
access to as few external IP addresses as practical:
• To allow access from a single IP address on the Internet, select Only This Computer
and enter the IP address that is allowed access.
• To allow access from a range of IP addresses on the Internet, select IP Address and
enter a beginning and ending IP address to define the allowed range.
• To allow access from any IP address on the Internet, select Everyone.
4. Specify the port number to be used for accessing the router interface.
To Next Page
Loading...
Need help?
General
