Network Maintenance
58
N600 Wireless Dual Band Gigabit VDSL2 Modem Router DGND3800B
Manage Configuration File
The router configuration settings are stored in a configuration file (*.cfg). This file can be
backed up to your computer, restored, or reverted to factory default settings.
Back Up
To back up the configuration file:
1. Select Maintenance > Backup Settings to display the following screen:
2. Click Save to save a copy of the current settings.
3. Choose a location to store the .cfg file that is on a computer on your network.
Restore
To restore a configuration file:
1. Enter the full path to the file on your network, or click the Browse button to find the file.
2. When you have located the .cfg file, click the Restore button to upload the file to the modem
router.
Upon completion, the modem router reboots.
Erase
Click the Erase button to reset the modem router to its factory default settings. Alternately,
press the Wireless On/Off and WPS buttons on the side panel of the modem router
simultaneously for 6 seconds.
Erase sets the password to password and the LAN IP address to 192.168.0.1, and enables
the modem router’s DHCP.
To Next Page
Loading...
Need help?
General
