VPN Configuration
157
N600 Wireless Dual Band Gigabit VDSL2 Modem Router DGND3800B
Step 1: Configure Gateway A (VPN Router at Main Office)
To configure a VPN tunnel:
1. Log in to the VPN router. Select VPN Policies to display the VPN Policies screen. Click
Add Auto Policy to proceed and enter the information.
toGW_A.com (in this example)
fromGW_A.com (in this example)
fromGW_A (in the example)
192.168.2.3 (in this example)
IKE Keep Alive is optional; has to match
Remote LAN IP Address when enabled
(remote computer has to respond to pings)
(Remote NAT router has to have
Address Reservation set and
VPN Passthrough enabled)
2. Click Apply when you are finished to display the VPN Policies screen.
To view or modify the tunnel settings, select the radio button next to the tunnel entry, and
then click Edit.
To Next Page
Loading...
Need help?
General
