NETGEAR ProSAFE M4300 series User Manual

Table 1. LEDs full 10G models (Continued)
DesignationLED
Solid green.The switch is functioning as a master in a stack.
Off.The switch is not a member of a stack or is functioning as a slave in a stack.
Stack Master
The Stack LED contains segments that can indicate the stack unit number of the switch.
Solid green indicating a number.The switch is a member of a stack.The LED
displays the stack unit number.
Solid green indicating E.The switch functions in ECO mode with all port LEDs turned
off.
Off.The switch is not a member of a stack.
Stack ID
Left side speed LED:
Solid green. A valid 1000 Mbps link is established on the port.
Solid yellow. A valid 10/100 Mbps link is established on the port.
Off. No link is established on the port.
Right side activity/link LED:
Solid green. A valid link is established on the port.
Blinking green.The port is transmitting or receiving packets
Off. No link is established on the port.
OOB Ethernet port
Hardware Overview
16
Managed Stackable Switch Series M4300

NETGEAR ProSAFE M4300 series Specifications

General

Stackable	Yes
Series	ProSAFE M4300
Layer	L3
Ports	Varies by model (24, 48 ports)
PoE	Available on some models (PoE+)
Management	Web, CLI, SNMP
Redundancy	Yes (dual power supplies on select models)
Form Factor	Rack-mountable
Throughput	Varies by model
Switching Capacity	Varies by model
Jumbo Frame Support	Yes
VLAN Support	Yes
Quality of Service (QoS)	Yes
Security Features	ACLs, 802.1x
Dimensions	Varies by model
Weight	Varies by model
Operating Temperature	0° to 50° C (32° to 122° F)
Storage Temperature	-4°F to 158°F (-20°C to 70°C)
Humidity	95% relative humidity, non-condensing
Power Supply	Varies by model
Warranty	Lifetime