If you do not know the IP address that was assigned to the AP, use one of the following
options to find the IP address of the AP:
•
Only if the AP is connected to the Internet, do one of the following:
- Option 1. Temporarily connect directly and log in: Temporarily connect a
computer directly either through an Ethernet cable or over WiFi or a mobile
device over WiFi to the AP and do the following:
1.
Launch a web browser and enter http://www.aplogin.net in the address
field.
A login window displays.
2. Enter the AP local device password.
The local device password is the one that you specified. The local device
password is case-sensitive.
The Home page displays.
3.
In the IP Settings pane, the IP Address field displays the IP address that is
assigned to the AP.
- Option 2. Temporarily connect directly and ping the AP: Temporarily connect
a computer or mobile device directly through an Ethernet cable or over WiFi to
the AP and send a ping to www.aplogin.net.
How to send a ping depends on your computer or mobile device.
On your computer or mobile device, the field with the ping results displays the
IP address that is assigned to the AP.
•
Regardless of whether the AP is connected to the Internet, do one of the following:
-
Option 1. Access your router: Access the DHCP server information of your router
to see the devices that are connected to it, including the AP. The IP address that
is assigned to the AP is listed.
- Option 2. Use an IP scanner: Use an IP scanner application (they are available
free of charge on the Internet) in the network of your existing router. The IP
scanner results include the IP address that is assigned to the AP.
If you made a direct connection to the AP, you can now terminate that connection.
Connect your computer or mobile device to the same network as the AP, and use the
discovered IP address to log in to the AP.
User Manual25Install and Access the AP in Your
Network
802.11ac Wireless Access Point Model WAC104
To Next Page
Loading...
Need help?
General
Weight and Dimensions
