7. Select the Wireless Base Station radio button.
8.
In the Repeater MAC Address 1 through 4 fields, enter the MAC addresses of the
APs that must function as repeaters.
If your AP is the base station, it can function as the “parent” for up to four other APs.
9. Click the Apply button.
Your settings are saved.
Set up a WiFi repeater
Use a wired Ethernet connection to set up a repeater unit to avoid conflicts with the
WiFi connection to the base station.
If you are using the AP as the base station with a non-NETGEAR AP as a repeater, you
might need to change more configuration settings. In particular, you might need to
disable the DHCP server function on the non-NETGEAR AP that is the repeater.
You can configure up to four repeaters.
User Manual79Manage the Advanced WiFi
Features
802.11ac Wireless Access Point Model WAC104
To Next Page
Loading...
Need help?
General
Weight and Dimensions
