4. In the Security Options section, select the WEP radio button.
5.
From the Authentication Type menu, select one of the following types:
• Automatic. Clients can use either Automatic or Shared Key authentication.
• Shared Key. Clients can use only Shared Key authentication.
6. From the Encryption Strength menu, select the encryption key size:
• 64-bit. Standard WEP encryption, using 40/64-bit encryption.
• 128-bit. Standard WEP encryption, using 104/128-bit encryption. This selection
provides higher encryption security.
7.
Specify the active key by selecting the Key 1, Key 2, Key 3, or Key 4 radio button.
Only one key can be the active key. To join the AP’s WiFi network, a user must enter
the key value for the key that you specified as the active key.
8.
Enter a value for the key:
•
For 64-bit WEP, enter 10 hexadecimal digits (any combination of 0–9, A–F). The
key values are not case-sensitive.
•
For 128-bit WEP, enter 26 hexadecimal digits (any combination of 0–9, A–F). The
key values are not case-sensitive.
To join the AP’s WiFi network, a user must enter the key value for the key that you
specified as the active key.
9. Click the Apply button.
User Manual40Manage the Basic WiFi Network
Settings
802.11ac Wireless Access Point Model WAC104
To Next Page
Loading...
Need help?
General
Weight and Dimensions
