Your settings are saved.
8.
To refresh the information on the page, click the Refresh button.
The page refreshes and displays the most recent log messages.
9.
To download the log file to your computer, click the Download button, and save
the log file to a location on your computer.
10. To clear the log, click the Clear button.
The pages refreshes and all log messages are cleared.
Set up a remote log server
You can let the AP send log messages to a remote log server, which is also referred to
as a remote syslog host.
You can also let the AP send the traffic log to the remote log server. (The traffic log is
too large to be stored locally on the AP.)
To set up a remote log server:
1.
Launch a web browser from a computer or tablet that is directly connected over WiFi
to the AP or connected to the same network as the AP.
2. Enter the IP address that is assigned to the AP.
If you are directly connected to the management WiFi network, you can enter
https://www.aplogin.net.
A login page displays.
If you do not know the IP address, see Find the IP address of the AP on page 24. For
more information about the management WiFi network, see Management WiFi
network on page 43.
If your browser displays a security warning, you can proceed, or add an exception
for the security warning. For more information, see kb.netgear.com/000062980.
3. Enter the AP login password and click the LOGIN button.
The AP login password is the one that you specified the first time you logged in to
the AP. The password is case-sensitive.
The Dashboard page displays.
4. Select Management > System Manager > Log.
The page that displays shows the System Log section.
User Manual105Monitor the AP and its Network
Connections
Essentials WiFi 6 AX1800 Dual Band Access Point Model WAX214v2
To Next Page
Loading...
Need help?
General
Weight and Dimensions
