Table 6. Wireless LAN Information - 5GHz section
DescriptionSetting
The WiFi mode, which is fixed at 802.11 ax/ac/n/a.Wireless Mode
The WiFi channel bandwidth. For for information, see Manage the channel high
throughput mode on page 67.
Channel Bandwidth
The WiFi channel. For for information, see Manage the WiFi channels on page 68.Channel
Table 7. Statistics Access Point 2.4GHz/5GHz section
DescriptionSetting
The profile number from 1 to 4 for the user WiFi network.Profile
The WiFi network name.SSID
The type of WiFi security on the SSID.Security
The VLAN ID, if any, that is configured for the SSID.VID
Shows whether VLAN isolation is enabled.802.1Q
The amount of packets in Bytes and the number of packets that is received on the
SSID.
RX (Packets)
The amount of packets in Bytes and the number of packets that is transmitted on the
SSID.
TX (Packets)
Display the WiFi connections
You can display the WiFi connections (the list of connected devices) on each radio.
To display the WiFi connections:
1.
Launch a web browser from a computer or tablet that is directly connected over WiFi
to the AP or connected to the same network as the AP.
2. Enter the IP address that is assigned to the AP.
If you are directly connected to the management WiFi network, you can enter
https://www.aplogin.net.
User Manual98Monitor the AP and its Network
Connections
Essentials WiFi 6 AX1800 Dual Band Access Point Model WAX214v2
To Next Page
Loading...
