Table 9. Factory default settings (Continued)
Default SettingFeature
DisabledEmail alerts
DisabledAutomatic firmware
upgrade check
All enabledLEDs
Technical specifications
The following table shows the technical specifications of the AP. For more information,
see the product data sheet, which you can download by visiting
netgear.com/support/download/.
Table 10. Technical specifications
DescriptionFeature
A power adapter is included for model WAX214PA but not for model WAX214v2.
Both models can operate with PoE power.
12V, 1.5A (18W), the plug is localized to the country of sale.
Maximum power consumption with a power adapter: 15.1W
Power adapter
If you do not use a power adapter, the LAN/PoE+ port requires 802.3at (PoE+)
power.
Maximum power consumption with PoE: 17W
Note: PoE might be considered a network environment 0 per IEC TR 62101, and
thus the interconnected ITE circuits might be considered safety extra low voltage
(SELV).
Power over Ethernet
7.71 x 7.71 x 1.74 in. (196 x 196 x 44 mm)Dimensions (L x W x H)
1.15 lb (523 g)Weight
32º to 104ºF (0° to 40°C)Operating temperature
5 to 95% maximum relative humidity, noncondensingOperating humidity
–40º to 158ºF (–40° to 70°C)Storage temperature
5 to 95% maximum relative humidity, noncondensingStorage humidity
One 10/100/1000 Mbps Ethernet (RJ-45) PoE+ port with Auto Uplink (Auto MDI-X)LAN interface
2.4 GHz radio
5 GHz radio
The WiFi interfaces can operate concurrently.
WiFi interfaces
User Manual126Factory Default Settings and
Technical Specifications
Essentials WiFi 6 AX1800 Dual Band Access Point Model WAX214v2
To Next Page
Loading...
