- Available 8-17 daily except weekends.
- Custom schedule.
Based on your selection, the Schedule Table is preconfigured. You can refine
the settings.
6.
To define a custom schedule or refine the settings for another type of schedule, do
the following as needed in the Schedule Table:
•
For each day, from the Available menu, select available or unavailable:
-
available: WiFi is turned on during the hours that you specify in the Duration
fields for the selected day.
-
unavailable: WiFi is turned off during the hours that you specify in the
Duration fields for the selected day.
•
For each day, in the Duration fields, specify the start hour and minutes and the
end hour and minutes.
If you selected available from the Available menu, WiFi is turned on during the
hours that you specify in the Duration fields for the selected day.
If you selected unavailable from the Available menu, WiFi is turned off during
the hours that you specify in the Duration fields for the selected day.
7. Click the Apply button.
Your settings are saved.
Change the DHCP server settings for guest
WiFi networks
A WiFi client that connects to a guest network (see Set up or change a guest WiFi network
on page 40) is assigned an IP address in a different address range than a regular WiFi
client. By default, the address range for guest WiFi clients is derived from the address
range of the DHCP server (or router) in your network. For example, if the DHCP address
range in your network is 192.168.100.2 to 192.168.100.254, the default address range
for a guest WiFi network is 192.168.200.100 to 192.168.200.199. You can change this
address range, which then applies to all WiFi guest networks on the AP.
You can change the DHCP server settings for a guest network only if you enable at least
one guest network on a user WiFi network (see Set up or change a guest WiFi network
on page 40).
User Manual62Manage Advanced WiFi Settings
Essentials WiFi 6 AX1800 Dual Band Access Point Model WAX214v2
To Next Page
Loading...
