If your browser displays a security warning, you can proceed, or add an exception
for the security warning. For more information, see kb.netgear.com/000062980.
3. Enter the AP login password and click the LOGIN button.
The AP login password is the one that you specified the first time you logged in to
the AP. The password is case-sensitive.
The Dashboard page displays.
4. Select Management > Network > Wireless.
The page that displays shows the Wireless Settings section and other sections.
5.
Scroll to the Management VLAN Setting section at the bottom of the page.
6. Click the Status Enable radio button.
7.
In the field that becomes available, enter the ID of the management VLAN.
By default, the management VLAN is VLAN ID 1.
8. Click the Apply button.
A pop-up window displays.
9. Click the OK button.
Your settings are saved.
User Manual32Manage the Wired Network
Settings
Essentials WiFi 6 AX1800 Dual Band Access Point Model WAX214v2
To Next Page
Loading...
