EasyManua.ls Logo

NETGEAR WAX214v2 - Page 96

NETGEAR WAX214v2
135 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Table 2. Device Information section (Continued)
DescriptionSetting
The fixed MAC address of the 5 GHz radio interface.MAC Address Wireless
LAN - 5GHz
The country and region that you set for the AP operation. For more information, see
Change the country and region of operation on page 66.
Country
The time that the AP detected. For more information, see Manage the date and time
settings on page 86.
Current Local Time
The period since that last time the AP started or rebooted.Uptime
The firmware version. For more information, see Manually update the AP firmware
on page 81.
Firmware Version
The device version.Device Version
Shows whether management traffic is tagged or untagged. For more information,
see Use an existing management VLAN on page 31.
Management VLAN ID
The speed of the LAN/PoE+ port.LAN Speed
Table 3. Memory Information section
DescriptionSetting
The total memory in KB and the available memory in KB and percentage.
Note: 1 KB = 1 kilobyte = 1000 bytes.
Total Available
The total memory in KB and the free memory in KB and percentage.Free
User Manual96Monitor the AP and its Network
Connections
Essentials WiFi 6 AX1800 Dual Band Access Point Model WAX214v2

Table of Contents

Related product manuals