EasyManuals Logo

NETGEAR WNDAP350 User Manual

NETGEAR WNDAP350
104 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #34 background imageLoading...
Page #34 background image
Basic Installation and Configuration
34
ProSAFE Dual Band Wireless N Access Point WNDAP350
You can configure the WNDAP350 to use the types of network authentication shown
in the table below.
- Data Encryption. The available options depend on the Network Authentication
setting selected (see Table 2 above); otherwise, the default is None. The Data
Encryption settings are explained in the table below:
Table 2. Network Authentication Types
Type
a
a. All options are available if using Access Point mode. In bridge modes some options may be unavailable.
Description
Open System Can be used with WEP encryption or no encryption.
Shared Key You must use WEP encryption and enter at least one shared key.
Legacy 802.1x You must configure the RADIUS Server Settings to use this option.
WPA with RADIUS You must configure the RADIUS Server Settings to use this option.
WPA2 with RADIUS
(WPA2 is a later version of WPA.)
Only select this if all clients support WPA2. If selected, you must use
AES encryption and configure the RADIUS Server Settings.
WPA and WPA2 with RADIUS This selection allows clients to use either WPA (with TKIP) or WPA2
(with AES). If selected, you must use TKIP + AES encryption and
configure the RADIUS Server Settings.
WPA-PSK You must use TKIP or TKIP + AES encryption and enter the WPA
passphrase (Network key).
WPA2-PSK
(WPA2 is a later version of WPA)
Only select this if all clients support WPA2. If selected, you must use
AES or TKIP + AES encryption and enter the WPA passphrase
(Network key).
WPA-PSK and WPA2-PSK This selection allows clients to use either WPA (with TKIP) or WPA2
(with AES). If selected, you must use TKIP + AES encryption and
enter the WPA passphrase (Network key).
Table 3. Data Encryption Settings
Data Encryption Type Description
None No encryption is used.
Open WEP Can be used with WEP encryption or no encryption.
64 bits WEP Standard WEP encryption, using 40/64 bit encryption.
128 bits WEP Standard WEP encryption, using 104/128 bit encryption.
152 bits WEP Proprietary mode that will only work with other wireless devices that support
this mode.
TKIP This is the standard encryption method used with WPA and WPA2.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the NETGEAR WNDAP350 and is the answer not in the manual?

NETGEAR WNDAP350 Specifications

General IconGeneral
BrandNETGEAR
ModelWNDAP350
CategoryWireless Router
LanguageEnglish

Related product manuals