Newtec TP210 - Page 28

Terminal Web Interface User Manual for the Satellite Terminal
version 3.0
19
Figure 19 - Web Interface > View Configuration Satellite Interface
3.7.2.3 The Parameters of the Satellite Interface
The displayed parameters and their descriptions are shown in the table below.
Parameter Description
Initial Receive Carrier
Preferred Mark for the preferred Initial Receive Carrier
Transport Mode DVB-S;
DVB-S2 (Constant Coding Modulation - CCM);
DVB-S2 (Adaptive Coding Modulation – ACM).
Frequency Initial receive frequency (GHz)
Symbol Rate Initial receive symbol rate (Mbaud)
Pointing Carrier
Default Mark for the default pointing carrier
Transport Mode DVB-S;
DVB-S2 (Constant Coding Modulation - CCM);
DVB-S2 (Adaptive Coding Modulation – ACM).
Frequency Initial receive frequency (GHz)
Symbol Rate Initial receive symbol rate (Mbaud)
Orbital Position
Orbital position of the satellite in degrees and East/West
selection.
Table 13 - Configuration Page > Satellite Interface Parameters > Initial Receive Carrier