Terminal Web Interface
User Manual for the Satellite Terminal
version 3.0
22
3.7.3.1 View the Multicast Configuration
Figure 23 - Web Interface > View Configuration Multicast
3.7.3.2 The Multicast Parameters
The displayed parameters and their description are shown below.
Parameter Description
Multicast Mode Disabled: Multicast mode is disabled.
Static: The active Multicast Configuration is based on
entered Static Multicast IP Addresses.
IGMP Dynamic: Dynamic IGMP multicast mode.
Static Multicast IP
Address 1-10
Maximum 10 multicast IP Addresses can be assigned
and active in case of Static Multicast Mode.
Table 14- Configuration Page > Multicast parameters
To Next Page
Loading...
