Error
Code
Problem indication Possible solution
070 Error information in the web interface:
Network connectivity lost
LED error indication:
Warning LED is on, RX LED is on
The connectivity with the satellite network
is lost. Reset the IPmodem.
Re
set the IPmodem (section
3.4)
Conta
ct your ISP if this error is persistent
for more than four hours.
080 Error information in the web interface:
ACM terminal can not login onto CCM
hub.
The terminal software is not compatible
with the satellite network.
Contact your ISP.
081 Error information in the web interface:
CCM te
rminal can not login onto ACM
hub.
The terminal software is not compatible
with the satellite network.
Contact your ISP.
999 Error information in the web interface:
Installation carrier setup failed
LED error indication:
Warning LED is on, RX LED is on
The activation of the installation carrier
test mode failed because the terminal was
not in the correct state.
Table 18 – Troubleshooting Table
To Next Page
Loading...
