Nexcom NSA 5130 - Chapter 3: System Setup; Removing the Chassis Cover

Copyright © 2011 NEXCOM International Co., Ltd. All Rights Reserved.
35
NSA 5130 User Manual
Chapter 3: System Setup
Chapter 3: System Setup
Removing the Chassis Cover
2. Slide the cover backward and then remove it from the chassis.
Prior to removing the chassis cover, make sure the unit’s power is
off and disconnected from the power sources to prevent electric
shock or system damage.
1. The 6 screws around the cover are used to secure the cover to the
chassis. Remove these screws and put them in a safe place for later
use.