Nexcom NSA 5130 - Network Configuration

Copyright © 2011 NEXCOM International Co., Ltd. All Rights Reserved.
67
NSA 5130 User Manual
Chapter 4: BIOS Setup
Network Configuration
This section is used to configure the LAN module.
Bypass Mode After Power On
Enables or disables the LAN module bypass mode after the system powers
on.
Bypass Mode After Power Off
Enables or disables the LAN module bypass mode after the system powers
off.
Version 2.11.1210. Copyright (C) 2011 American Megatrends, Inc.
→ ←: Select Screen
↑↓: Select Item
Enter: Select
+
-:
Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save
ESC: Exit
Aptio Setup Utility - Copyright (C) 2008 American Megatrends, Inc.
Advanced
Switch All Bypass mode
to Enable/Disable after
Power on
Network Conguration
Bypass Mode After Power On
Bypass Mode After Power Off
[All Disabled]
[All Disabled]