Nidec E300 Series - Menus P, Q and R: Option module set-up

Safety
information
Product
information
Mechanical
installation
Electrical
installation
Getting
started
User Menu A Commissioning
Advanced
Parameters
Diagnostics Optimization CT MODBUS RTU Technical Data
Installation and System Design Guide 239
Issue Number: 1
8.15 Menus P, Q and R: Option module set-up
Figure 8-25 Location of option module slots and their corresponding menu numbers
1. Solutions Module Slot 1 - Menu P
2. Solutions Module Slot 2 - Menu Q
3. Solutions Module Slot 3 - Menu R
8.15.1 Parameters common to all categories
The option module ID indicates the type of module that is installed in the corresponding slot. See the relevant option module user guide for more
information regarding the module.
Parameter Range(
Ú) Default(Ö)Type
mm.001 Module ID 0 to 65535
RO Num ND NC PT
mm.002 Software Version 00.00.00 to 99.99.99 RO Num ND NC PT
mm.003 Hardware Version 0.00 to 99.99 RO Num ND NC PT
mm.004 Serial Number LS
0 to 99999999
RO Num ND NC PT
mm.005 Serial Number MS RO Num ND NC PT
Option module ID Module Category
0 No module installed
105 SI-Encoder
Feedback
106 SI-Universal Encoder
209 SI-I/O Automation (I/O Expansion)
310 MCi 210
Automation (Applications)
311 MCi 200
304 SI-Applications Plus
308 SI-DCP