Safety
information
Product
information
Mechanical
installation
Electrical
installation
Getting
started
User Menu A Commissioning
Advanced
Parameters
Diagnostics Optimization CT MODBUS RTU Technical Data
36 Installation and System Design Guide
Issue Number: 1
A grommet kit is available for size 7 to 11 finger guards.
Table 3-1 Grommet kit (size 7 to 11)
3.4 Installing / removing option modules, keypad
Figure 3-4 Installation of a standard option module
Option module slots must be used in the following order: slot 3, slot 2 and slot 1
Drive size Part number Picture
Size 7 - Kit of 8 x single entry grommets 3470-0086
Size 8 - Kit of 8 x single entry grommets 3470-0089
Size 8 - Kit of 8 x double entry grommets 3470-0090
Size 9, 10 and 11 - Kit of 8 x double entry grommets 3470-0107
Power down the drive before installing / removing the option module. Failure to do so may result in damage to the product.
To Next Page
Loading...
