Safety
information
Product
information
Mechanical
installation
Electrical
installation
Getting
started
User Menu A Commissioning
Advanced
Parameters
Diagnostics Optimization CT MODBUS RTU Technical Data
Installation and System Design Guide 49
Issue Number: 1
3.5.3 Mounting brackets
Table 3-3 Mounting brackets size (3 to 11)
* A gasket is supplied with supplied with the through-panel mounting kit for all sizes, refer to Table 3-2 for kit part numbers.
Frame size Surface Qty Through-panel* Qty
3 x 2
x 2
Hole size: 5.5 mm (0.22 in)
x 2
Inner hole size: 6.5 mm (0.26 in)
Outer hole size: 5.5 mm (0.22 in)
Inner hole size: 6.5 mm (0.26 in)
Outer hole size: 5.5 mm (0.22 in)
4 x 2
x 3
Hole size: 5.2 mm (0.21 in)
x 2
Hole size: 6.5 mm (0.26 in) Hole size: 6.5 mm (0.26 in)
5 x 2
x 2
Hole size: 5.2 mm (0.21 in)
x 2
Hole size: 6.5 mm (0.26 in) Hole size: 6.5 mm (0.26 in)
6 x 2
x 3
Hole size: 5.2 mm (0.21 in)
x 2
Hole size: 6.5 mm (0.26 in) Hole size: 6.5 mm (0.26 in)
7 x 2
x 2
Hole size: 9 mm (0.35 in)
x 2
Hole size: 9 mm (0.35 in) Hole size: 9 mm (0.35 in)
8 x 2
x 6
Hole size: 5.3 mm (0.21 in)
x 2
Hole size: 9 mm (0.35 in) Hole size: 9 mm (0.35 in)
9E/10/11 x 2
x 8
Hole size: 5.5 mm (0.22 in)
x 2
Hole size: 9 mm (0.35 in) Hole size: 9 mm (0.35 in)
To Next Page
Loading...
