Nidec MCE Motion 4000 - Safety and Other Symbol Meanings

42-02-2M01 A1
End User License Agreement
This End User License Agreement (“Agreement”) grants you the right to use the software contained
in this product (the “Software”) subject to the following restrictions: You may not: (i) copy the
Software, except for archive purposes consistent with your standard archive procedures; (ii) trans-
fer the Software to a third party apart from the entire product; (iii) modify, decompile, disassem-
ble, reverse engineer or otherwise attempt to derive the source code of the Software; (iv) export
the Software or underlying technology in contravention of applicable U.S. and foreign
export laws and regulations; and (v) use the Software other than in connection with operation of
the product.
“LICENSOR'S SUPPLIERS DO NOT MAKE OR PASS ON TO END USER OR ANY OTHER THIRD PARTY,
ANY EXPRESS, IMPLIED OR STATUTORY WARRANTY OR REPRESENTATION ON BEHALF OF SUCH
SUPPLIERS, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF NON-INFRINGE-
MENT, TITLE, MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.”
Important Precautions and Useful Information
This preface contains information that will help you understand and safely maintain MCE
equipment. We strongly recommend you review this preface and read this manual before
installing, adjusting, or maintaining Motion Control Engineering equipment. This preface dis-
cusses:
• Safety and Other Symbol Meanings
• Safety Precautions
• Environmental Considerations
•In This Guide
Safety and Other Symbol Meanings
Danger
This manual symbol is used to alert you to procedures, instructions, or situations which, if not done
properly, might result in personal injury or substantial equipment damage.
Caution
This manual symbol is used to alert you to procedures, instructions, or situations which, if not done
properly, might result in equipment damage.
Note
This manual symbol is used to alert you to instructions or other immediately helpful information.