42-02-2M01 A1 2-1
In this Section
This section contains instructions for installing the controller and peripheral equipment. If you
are reading this on a computer, click the blue text to jump to the appropriate section.
• Safety: page 2-2.
• Preparation: page 2-3.
•MCE Wiring Prints: page2-5.
• Controller Installation: page 2-6.
• Connect AC power: page 2-9.
• Connect motor, brake, encoder: page 2-10.
•Emergency Brake/Rope Gripper installation: page 2-14.
• Initial Power Up: page 2-14.
• Auto-Tune Drive: page 2-16.
• Set up for Construction operation: page 2-21.
• Set up for Inspection operation: page 2-37.
• Running on Inspection: page 2-40.
• Finishing Installation: page 2-41.
• Installing the landing system: page 2-42.
• Adjust Brake: page 2-68.
• Traction Auxiliary Power Supply: page 2-68.
• Installation Review: page 2-68.
Installation
To Next Page
Loading...
