Installation
3-23
Part 1107600_03
2014 Nordson Corporation
Parameter Name Range of Values Default Value
Output Setup
43 Optional Output 4 0–6 0 (disabled)
44 Optional Output 5 0–6 0 (disabled)
45 Optional Output 6 0–6 0 (disabled)
46 Optional Output 7 0–6 0 (disabled)
Seven-day Clock
50 Current Day 1 to 7 (1 = Monday) —
51 Current Hour 0000 to 2359 —
55 Schedule 1 Heaters On 0000 to 2359 06:00
56 Schedule 1 Heaters Off 0000 to 2359 17:00
57 Schedule 1 Enter Standby 0000 to 2359 —:—
58 Schedule 1 Exit Standby 0000 to 2359 —:—
60 Schedule 2 Heaters On 0000 to 2359 —:—
61 Schedule 2 Heaters Off 0000 to 2359 —:—
62 Schedule 2 Enter Standby 0000 to 2359 —:—
63 Schedule 2 Exit Standby 0000 to 2359 —:—
65 Schedule 3 Heaters On 0000 to 2359 —:—
66 Schedule 3 Heaters Off 0000 to 2359 —:—
67 Schedule 3 Enter Standby 0000 to 2359 —:—
68 Schedule 3 Exit Standby 0000 to 2359 —:—
71 Schedule for Monday 0−7 0
72 Schedule for Tuesday 0−7 0
73 Schedule for Wednesday 0−7 0
74 Schedule for Thursday 0−7 0
75 Schedule for Friday 0−7 0
76 Schedule for Saturday 0−7 0
77 Schedule for Sunday 0−7 0
Automatic Fill Timer
78 Automatic Fill Timer 0−99 seconds 0 (Disabled)
PID Selection
80−91 PID Selection for Hose/Gun Receptacles 0−3 0 or 1
NOTE: Motor control parameters are set differently from operating
parameters. Refer to Setting Up the Motor Control later in this section. Some
applications will require a change to one or more motor control parameters.
To Next Page
Loading...
